K-beauty

Korean Sunscreen Filters vs US Sunscreens, Explained

Which UV filters Korean sunscreens use, which the FDA still blocks after the 2026 bemotrizinol decision, and how SPF and PA labels differ.

Sunscreen tube from the Sungboon Editor brand with a yellow gradient, next to a white swatch of its texture.
Photo: OLIVE YOUNG

Korean sunscreen filters differ from US ones because Korea and the US regulate sunscreen as different things. Korea reviews it as a functional cosmetic and has approved a long list of modern UV filters. The US treats it as an over-the-counter drug, so its approved list has barely moved since 1999, and only one new filter, bemotrizinol, was added in 2026.

What Korean sunscreen filters are and who approves them

A UV filter is the active molecule or mineral in a sunscreen that absorbs, reflects or scatters ultraviolet light. Everything else in the tube, from centella to birch sap, is there for texture and skin feel.

In Korea, only filters designated by the Ministry of Food and Drug Safety (MFDS) can be used for UV protection. Sunscreen sits in a category called functional cosmetics, and an SPF or PA claim can only be printed after the product passes defined testing. The US takes a different route and classes sunscreen as an OTC drug under an FDA monograph.

MFDS publishes the permitted filters and their maximum concentrations in an annex to its functional cosmetics rules. You can read the table in the MFDS annex listing allowed sunscreen filters. It runs to roughly two dozen entries or more, depending on which version you read, and it was extended in August 2024. That month MFDS moved to designate tris-biphenyl triazine as a new UV filter. The same proposal cut the limit for benzophenone-3 (oxybenzone) from 5% to 2.4%, with 5% kept for face, hand and lip products. So the Korean list grows, but it also tightens.

The Korean sunscreen filters you'll see on a label

Most Korean tubes list their filters in the full ingredient list (전성분) in INCI names. These are the ones worth recognising. Limits come from the MFDS annex unless noted, and the US column reflects the situation as of November 2026.

Filter (trade name) Korea max US status
Bemotrizinol / bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S) 10% Allowed up to 6% by FDA final order, effective Aug 9, 2026
Bisoctrizole / methylene bis-benzotriazolyl tetramethylbutylphenol (Tinosorb M) 10% Not available
Ethylhexyl triazone (Uvinul T 150) 5% Not approved
Avobenzone (butyl methoxydibenzoylmethane) 5%, per annex row 9 3% in the US
Homosalate 10% Allowed; some US formulas use more (see below)
Zinc oxide, titanium dioxide 25% Proposed GRASE up to 25%

Two terms need a sentence each. Bemotrizinol is a large-molecule organic filter that covers both UVB and UVA, and its trade name is Tinosorb S. GRASE means "generally recognized as safe and effective", the FDA's test for whether an ingredient can be sold without its own drug application.

One correction to the usual story. "Korean sunscreen" does not automatically mean new-generation filters. An older survey of 100 Korean sunscreens found that titanium dioxide (81 products), ethylhexyl methoxycinnamate (69), zinc oxide (48), ethylhexyl salicylate (48) and bemotrizinol (44) were the most detected. That is a mix of old and new. The modern filters are common in the popular tubes, but they aren't in every product on the shelf.

A man in a blue shirt and glasses shields his face from the sun with a yellow folding fan on a bright city street.
Photo: korea.kr

Why the US list stayed so short for so long

The US monograph from 1999 named 16 filters. In 2021 the FDA proposed sorting them, and the result has been slow. Zinc oxide and titanium dioxide were proposed as GRASE, PABA and trolamine salicylate as not GRASE, and 12 others, including avobenzone, octinoxate, octisalate, octocrylene and oxybenzone, as having insufficient data. The agency has said that request does not mean it has concluded the 12 ingredients are unsafe. The details are in the FDA's own Q&A on its sunscreen regulatory actions. That 2021 proposed order has not yet been finalized.

Under the old process, a new filter needed a long drug-style review. The CARES Act created a faster route, and bemotrizinol was the first to use it.

The UVA problem with older filters

The practical gap is UVA. Avobenzone is the main UVA filter in US formulas, and it breaks down in sunlight on its own. One formulation study reported that 4% avobenzone alone kept 23% of its performance after 25 MED of irradiation, and 3.6% octocrylene raised that to 90%. Cosmetics & Toiletries reviewed the avobenzone stabilizer research if you want the numbers. This is why US avobenzone formulas lean on octocrylene or similar stabilizers. It can be solved, but it limits the formula. Filters such as Tinosorb S are described as inherently photostable, so they don't need that support.

What the 2026 bemotrizinol approval changes

On June 10, 2026, the FDA issued final order OTC000039. It adds bemotrizinol at concentrations up to 6 percent to the sunscreen monograph, as published in the Federal Register notice of the final order. It applies to broad-spectrum products for adults and children six months and older. The order became effective on August 9, 2026. It is the first new active in over 20 years.

Three limits keep this from opening the US market to Korean formulas.

  • It's one filter. Tinosorb M, DHHB, ethylhexyl triazone and Iscotrizinol are still not approved for US sunscreens. Many Korean formulas combine several of these.
  • The US cap is lower. 6% in the US against 10% in Korea.
  • Exclusivity. The 18-month exclusivity for dsm-firmenich runs from the August 9, 2026 effective date. I'd expect US products with it to stay few for a while, but that is my reading, not a published forecast.

The FDA approved an ingredient. As one retailer guide puts it, no K-beauty sunscreen product has been FDA-approved, only the ingredient.

Same brand, different formula: the Korean and US versions

This is where the rules show up on a shelf. Several Korean brands now sell two versions. Round Lab's Korean Birch Juice sunscreen uses Uvinul A Plus and Tinosorb S. Its US version uses avobenzone, homosalate and octisalate. For SKIN1004's Water-Fit Sun Serum, the Korean formula has Uvinul A Plus, Uvinul T 150, Tinosorb M and tris-biphenyl triazine, while the US one is rebuilt on avobenzone 2.7%, homosalate 13.6%, octisalate 4.5% and octocrylene 9%.

Look at that homosalate figure again. Korea's annex caps homosalate at 10%, so a US-formula tube with 13.6% wouldn't pass in Seoul. The rules constrain both directions, and neither side is simply "stricter".

Beauty of Joseon is the best-known case. According to one review site, it stopped selling the original Relief Sun in the US around February 2025 and replaced it with a reformulated SPF 40 product. I couldn't confirm that date from the brand itself, so treat it as reported. Brands that already used US-legal filters avoid the problem; CNN's roundup notes Neogen's Airy sunscreen uses US filters.

My view: the US versions aren't bad products, and a lot of the online talk about Korean sunscreens "outclassing" American ones overstates it. The honest difference is UVA performance per layer and texture, not safety.

Black-and-white photo of a MAC cosmetics store entrance with shoppers browsing inside a mall corridor.
Photo: striatic / Flickr (CC BY 2.0)

Reading SPF and PA on a Korean label

Korean labels carry two ratings. SPF measures UVB protection. PA, short for Protection Grade of UVA, measures UVA protection. The PA system came from Japan, and MFDS added the top grade in 2016. It set PA++++ for a UVA protection factor of 16 or higher, aligning grades with Japan and China.

  • PA+: factor 2 to under 4
  • PA++: 4 to under 8
  • PA+++: 8 to under 16
  • PA++++: 16 or higher

(Grades from MFDS's explanation of the move from three to four grades.)

SPF in Korea is shown as a number up to 50, and anything above is printed SPF 50+. MFDS explained in June 2026 that above SPF 50 the real difference is small, and the cap exists because shoppers misread high numbers as total blocking. MFDS also checks claims. In a 2023 notice it flagged a product whose human test measured 50 or lower but was labelled SPF 50+.

Water resistance has two grades. A water-resistant product keeps at least 50% of its SPF after about one hour of water exposure; a very water-resistant one after about two hours.

Note that the Korean scheme has no "broad spectrum" category, which belongs to the US system. The two aren't interchangeable, so don't read PA++++ as a US-equivalent claim.

How to check a tube before you buy in Seoul

  1. Find the functional cosmetic mark. MFDS tells shoppers to look for the mark showing UV protection is recognised by the ministry. Product data is searchable on nedrug.mfds.go.kr, MFDS's drug safety portal.
  2. Read the filter list, not the front. The Korean sunscreen filters named above appear in the ingredient list, usually by INCI name.
  3. Match SPF and PA to the day. MFDS suggests SPF15/PA+ or higher for indoors or short walks, and SPF50+ with PA+++ or PA++++ for long sun exposure.
  4. Apply early and reapply. MFDS advice is to apply a generous amount about 15 minutes before going out and reapply when sweating or after long exposure. For sticks and cushions, one pass may not be enough, so layer them.
  5. Skip direct spraying on the face. MFDS recommends putting spray sunscreen on your hand first.

If you plan to carry tubes home, the filter list also tells you what you've bought. Names like Tinosorb M and Uvinul T 150 mean the product is the Korean or European formula, and a US shop may not be able to sell it as a sunscreen. For persistent irritation or a skin condition, ask a dermatologist, since a high SPF or PA grade doesn't make a product gentler.

Frequently asked questions

Why are Korean sunscreens different from American ones?

The main reason is regulation. Korea treats sunscreen as a functional cosmetic reviewed by the MFDS, which has approved a broad list of UV filters, including Tinosorb M and Uvinul T 150. The US treats sunscreen as an over-the-counter drug, and its approved list stayed almost unchanged for decades. Korean formulas therefore often use filters that US brands cannot legally include.

Is Tinosorb S approved by the FDA now?

Yes, under its ingredient name bemotrizinol. The FDA issued a final order on June 10, 2026, allowing it at up to 6 percent, effective August 9, 2026. That approves the ingredient, not any Korean product. Tinosorb M, Uvinul A Plus and Uvinul T 150 were still not on the US list as of November 2026.

What does PA++++ mean on a Korean sunscreen?

PA stands for Protection Grade of UVA. PA++++ is the top grade and means the measured UVA protection factor is 16 or higher, tested by persistent pigment darkening on human skin. PA+++ covers 8 to under 16. The US has no PA grade, so PA++++ cannot be converted into a US label claim.

Are Korean sunscreen filters safe if the FDA has not approved them?

Lack of FDA listing is not a finding of harm. Korea's MFDS sets maximum concentrations for each filter, and several of these filters are also used in Europe. Even for common US filters, the FDA has said requests for more data do not mean the ingredients are unsafe. People with reactive skin should ask a dermatologist about a specific product.

How can I tell if a Korean sunscreen sold in the US is the Korean formula?

Read the active ingredients. Names such as bemotrizinol, bis-ethylhexyloxyphenol methoxyphenyl triazine, Tinosorb, Uvinul or ethylhexyl triazone point to the Korean or European formula. Avobenzone, homosalate, octisalate and octocrylene point to the US version. A PA++++ mark and an SPF 50+ claim also suggest the Korean original, which US shops usually cannot sell as a sunscreen.